A-DNR(Digital Noise Reduction)
3-Axis Gimbal Vari-focal
Before installing and using the camera, please read the instructions thoroughly and retain them for reference.
This symbol is intended to alert the user to the presence of non insulated
“dangerous voltage” within the product”s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Wiring methods shall be in accordance with the National Electric Code. This product is manufactured to comply with the CE and FCC Certificate
Composition ———————————————– 4
Features —————————————————- 5
Dimension ————————————————– 6
Parts Name and Description ————————— 7
Installation ————————————————– 8
Connections ———————————————— 9
Adjustment ——————————————– 10~11
OSD Menu Instructions —————————- 12~25
Fan & Heater Specifications(Option) —————- 26
Specifications —————————————– 27~28
Confirm that the following parts are included:
CAMERA INSTRUCTION MANUAL MOUNTING
ACCESSORIES SERVICE MONITOR & CONTROL CABLE
? Torx Wrench : Length 90mm
? Dowel : Length 30mm, Thickness 6mm(4pcs)
? Mounting Screws : ST4x50(4pcs)
– These screws are used to affix the surface mount plate on the wall or ceiling. If
you necessary, use the dowels included in the package.
? Pipe Cap Driver(1pc) : This is used to open/close the pipe cap of surface mount
? Service Monitor and Control Cable : Monitoring the display screen through
portable monitor and adjusting the OSD menu of the camera externally.
? S ONY 1/3″ Super HAD High-resolution Color CCD
? 6 00TVL High-Resolution
? 2.8~11mm Vari-Focal, DC Auto Iris F1.2 Lens
? Built-in DNR, Sens-up, D-Zoom, OSD function
? Color & B/W Auto switching by photocell (Day & Night type)
? Auto switching IR-LED control by photocell (24pcs IR-LED type)
? Easy Adjustment of Focal Length & Focus
? Built-in Service Monitor & OSD Control Port
? Fan & Heater(Option)
? 3-Axis Gimbal bracket
? Surface mount type
? Vandal Resistant & Weatherproof Housing(IP-66)
? Power: AC24V/DC12V
Dimension (Unit: mm)
Parts Name and Descriptions (This Model AC24/DC12 TYPE)
2. Dome Cover Ring
4. Safety Wire
5. Service Monitor Output Port
6. Surface Mount Plate
7. Foam PAD 8. Assembly Screws(M4x12) 9. Mounting Screws(ST4x50) 10. Gimbal-Bracket 11. Video/Power Cable
1. Remove dome cover by loosening 3 screws. Use the supplied Torx wrench.
2. There are four mounting holes on the surface mount so that you can install
the dome unit in any place such as ceiling, wall and etc.
3. Use the mounting screws to affix the surface mount to a sturdy surface. If
necessary, use the supplied dowels.
4. Adjust the 3-Axis gimbal and point the camera to the desired area.
5. Assemble the dome cover with the installed dome unit
To avoid smear, do not expose the camera directly
to a strong light source such as the sun or spot light.
Power connections: Requires DC12V or AC24V input depending on
– All camera models are supplied with service monitor output the
If you need to set up OSD menu, use the service monitor and control cable.
Adjustments ???? 3-Axis Gimbal Adjustment 1. Rotation: Adjusting the rotation to
desired angle by hand. 2. Tilt: Adjusting the tilt to move up and down by hand. 3. Pan: Adjusting the pan to turn right and left by hand.
???? Zoom & Focus Adjustment
1. If you need to make adjustments for the viewing angle/focus, move the levers as
2. Loosen Zoom/ Focus Levers
– Zoom(Field of View): Telephoto(T) to Wide(W)
– Focus: Near(N) to Infinity(?)
3. After the adjustments, tighten the Zoom/Focus levers.
Adjustments ???? IR-LED On/Off Switch (IR-LED type only)
– Switch OFF : Select the OFF setting if the subject in the picture has extreme IR LED
– Switch ON : Select the ON setting if the subject in the picture has no IR LED
SD Menu Instructions
1. OSD Control Key
(Service Monitor and Control Cable)
OSD Menu Control
> SET Key: Access to the menu or confirm the setting.
To enter the main menu, press the Set Key down once.
> UP/DOWN key(??) : Choose the desired sub-menu.
> LEFT/RIGHT key (? ?): Set up the value of the selected menu.
Used to adjust the desired menu selection, and to move the cursor left or right.
???? Using Icons in the Menu[EXIT] Exit the menu setting. Before you exit the menu setting select SAVE to save your settings, or QUIT to cancel. [RET] Return to the previous menu. [HOME] Return to the main menu. [SAVE] Use to save your settings of MASK AREA, PRIVACY ZONE and more. Once you save your settings, they will remain even if you select QUIT in the menu. [DEL] Use to delete your settings of MASK AREA, PRIVACY ZONE and more. Once you save your settings, they will remain even if you select QUIT in the menu.
OSD Menu Instructions
2. Menu Table
CAMERA SET CAMERA ID OFF / ON IRIS ALC / ELC AGC* OFF / VERY LOW / LOW / MID / HIGH /
VERY HIGH / USER / FIX MOTION S.SLOW / SLOW / NORM / FAST / F.FAST DNR OFF / LOW / MID / HIGH / USER(1~16) SHUTTER OFF, AUTO1
SENS-UP OFF /AUTO x2~x256 / FIX x2~x256 FLICKERLESS OFF / ON DIS OFF / ON DAY/NIGHT DAY / NIGHT / AUTO / EXT
WHITE BAL. DAY ATW1,2 / AWC / 3200K / 5600K NIGHT OFF / ATW1,2 / AWC / 3200K / 5600K DIGITAL ZOOM OFF / ON DETAIL 0~3 V-SINK (INT)—
AGC COLOR SUP
LOW / MID / HIGH
REVERSE OFF / H/V / H.V POSI/NEGA + / – PIP OFF / ON *AGC : If you select OFF or FIX mode in the SENS-UP menu, you can see the AGC
menu on your screen.
OSD Menu Instructions MAIN MENU
INTELLIGENCE MOTION OFF / TRACKING / DETECTION ADVANCED** OFF, MOVED / FIXED MASK AREA 1~4 DISPLAY ON / OFF SENSITIVITY 1~7 RESOLUTION 1~5 ALARM OUT MOTION ON / OFF(N.A)* PRIVACY ZONE ZONE 1~8 PRIVACY SET ON / OFF STYLE MOSAIC 1~4 / COLOR OTHER SET FACTORY
OK / CANCEL OSD COLOR B.W / R / G / B COMMUNICATION PROTOCOL N.A* BAUD RATE N.A* ADDRESS N.A* SYSTEM INFO LANGUAGE 5 Languages *N.A : Not Available
**ADVANCED : Option
OSD Menu Instructions
3. Menu Setup
1) Press the SETUP key to access the menu mode.
2) Select the desired feature by using UP/DOWN keys on the control part.
: Configure camera related functions and data.
CAMERA ID : OFF / ON
Assign a unique name to a camera.
ou can enter up to 54 alphanumeric or special characters for the CAMERA ID. Select
LOCATION and press the SETUP key to move the display position of the CAMERA ID.
RIS : ALC/ ELC
Adjust the intensity of radiation incoming of the camera.
? ALC(Automatic Light Control) :
If you press the SETUP key on ALC, you will see LENS, LEVEL, BACKLIGHT options
on your screen. ???? In the LENS option, you must select DC for this camera model.
OSD Menu Instructions
In the LEVEL option, you can adjust the overall brightness.
“+” will increase the brightness and “-” will decrease it.
In the BACKLIGHT option, you can adjust the BLC(Back Light Compensation) function
to improve the sharpness of the image in a high contrast scene.
If you select the BACKLIGHT option to WDR*, you can adjust the shutter speed in
WDR LEVEL and the brightness in WEIGHT.
You can also select either OUTDOOR or INDOOR in WHITE CAL.
WDR(Wide Dynamic Range)* extends the gain range of the screen that is mostly
useful if camera takes a simultaneous picture of both indoor and outside nearby
Namely, it improves the sharpness of the picture in outdoor scenery as well as indoor.
(*)WDR function is optional.
? ELC(Electronic Light Control) :
You can make the ELC function active or not.
It is similar to ALC setting, you can specify the BLC area.
AGC (Automatic Gain Control) : OFF / VERY LOW~VERY HIGH / USER / FIX
Set the AGC level of the camera. When the AGC is active, the camera automatically
increase the sensitivity by amplifying the Video signal when the strength of the signal
falls below the normal value.
? USER :
In this mode, you can break the level in 16 steps from VERY LOW to VERY HIGH to
OSD Menu Instructions ? FIX :
If you press the SETUP key on FIX, you can fix one of the 16 detailed levels from
VERY LOW to VERY HIGH.
– If the DAY / NIGHT menu of the CAMERA SET is set to AUTO, the AGC menu will be
– If the FLICKERLESS is set to ON, the FIX mode of AGC will be disabled.
– If you set the BACKLIGHT to WDR, the FIX mode is not available.
MOTION : S.SLOW / SLOW / NORM / FAST / F.FAST
Adjust the strength of the AGC level for a control of the camera motion. To monitor fast
moving objects in a low contrast scene, select F.FAST while select S.SLOW for hardly
moving objects in the same lighting condition.
– This is available only if the SENS-UP menu is set to AUTO.
– if the DAY / NIGHT menu of the CAMERA SET is set to AUTO, the MOTION menu
will be deactivated.
DNR : OFF / LOW ~ HIGH / USER(1~16)
You can configure the DNR(Digital Noise Reduction) related settings.
This is especially useful for a severely distorted screen.
You can set the level if you set DNR to USER
SHUTTER : OFF, AUTO1/100(120)~1/10K, 1/100(120)~1/10K
You can select one of the 7 options from 1/100(PAL : 1/120) to 1/10K for the fixed high
speed electronic shutter, which is mostly used for snapping a fast moving object. The
auto high speed electronic shutter operates as the fixed high speed shutter in a high
contrast scene but automatically focuses the target if the iris opens fully in a low
contrast scene like in
OSD Menu Instructions
ELC mode. When it gets bright again, the mode will switch to the fixed high speed
electronic shutter mode.
– If the IRIS menu is set to ELC, the SHUTTER menu will be deactivated as you adjust
the brightness using the electronic shutter.
– If the SENS-UP menu is set to AUTO, only OFF and AUTO are available in the
– If the SENS-UP menu is set to FIX, the SHUTTER menu will be deactivated.
– If the FLICKERLESS function is set to ON, the SHUTTER menu will be deactivated.
SENS-UP : OFF / AUTO x2 ~x256 / FIX x2 ~x256
Automatically detects the ambient light of darkness in the dark or low contrast scene to
extend the accumulated time, keeping the brightness and sharpness image. It can be
also used as FIX mode.
– If the SHUTTER menu is set to fixed electronic shutter mode, the SENS-UP menu
will be deactivated.
– If the FLICKERLESS menu is set to ON, the FIX mode of the SENS-UP will be
– If the IRIS menu is set to ELC, the electronic shutter will control the brightness so the
SENS-UP function cannot be set to FIX mode, but to OFF or AUTO mode.
– If the SHUTTER menu is set to AUTO, the SENS-UP menu can be set to either OFF
or AUTO mode.
OSD Menu Instructions
FLICKERLESS : OFF / ON
If set to ON, the shitter speed will be fixed to 1/100(PAL : 1/120) second.
This will prevent possible screen distortion due to a mismatch between the vertical
sync frequency and the blinking frequency of the lighting.
– If the IRIS menu is set to ELC mode, the FLICKERLESS menu will be deactivated.
– If the SHUTTER menu is set to AUTO or FIX mode, the FLICKERLESS menu will be
– If the SENS-UP menu is set to FIX mode, the FLICKERLESS menu will be
– If the AGC menu is set to FIX mode, the FLICKERLESS function will be disabled.
DIS : OFF / ON
Digital Image Stabilization will set the anti-shake compensation.
– If you set DIS to ON, the compensation area will be enlarged as set in the digital
– If you set the digital zoom factor to bigger than the enlarged zoom factor for the
compensation, the DIS function will be deactivated.
DAY / NIGHT : DAY / NIGHT / AUTO / EXT ? DAY : if set to DAY, it will be fixed DAY mode regardless of the ambient conditions.
? NIGHT : If set to NIGHT, it will be fixed to Black-and-White mode regardless of the
ambient conditions. If you press the SETUP key with a NIGHT submenu selected, you
will see a menu where you can set Burst to OFF/ON. If BURST is set to ON, the Burst
signal will output together with the black-and-white composite video signal. If BURST
is set to OFF, the Burst signal does not output.
OSD Menu Instructions ? AUTO : The camera will be automatically switched between DAY and NIGHT mode,
according to the lighting condition. If you press the SETUP key on AUTO, you will see
the BURST, DAY?NIGHT, NIGHT?DAY, MASK AREA options on your screen.
You can set the BURST option to OFF/ON, or select to output the Burst signal in
In the DAY?NIGHT option, you can select from LOW to HIGH for the brightness of
DAY?NIGHT, which is a brightness level in switching from the color filter to Black &
White. Closing to LOW from HIGH will switch the filter in a low contrast scene. The
DWELL TIME of DAY?NIGHT is a time required to determine the need for switching
In the NIGHT?DAY option, you can select from LOW to HIGH for the brightness of
NIGHT?DAY, which is a brightness level in switching from the Black & White to color.
Closing to LOW from HIGH will switch the filter in a low contrast scene. The DWELL
TIME of NIGHT ?DAY is a time required to determine the need for switching the filter.
In the MASK AREA option, you can specify MASK 1 and 2 simultaneously. This
function is to prevent a filter switching error or inability of determining the switch in
existence of a high spot light source at night.
– If BACKLIGHT is set to BLC, the MASK AREA function will be deactivated.
Standard Type* ? EXT : This enables an auto switching between DAY and NIGHT mode using the
interface with the external sensor.(Not Available) Caution!
Standard type cameras are not provided filter switching function in the AUTO option.
OSD Menu Instructions
Day & Night Type** ? EXT : This enables an auto switching between DAY and NIGHT mode using the
detected brightness level by photocell. Caution!
This camera has the inner photocell. Therefore we recommend the “DAY and NIGHT” menu setting as “EXT” to get the best results.
WHITE BAL : DAY / NIGHT
If you want to adjust the color scheme, use the WHITE BALANCE function. ? DAY : In the mode, you can set the color values of RED and BLUE. The screen will
be displayed in colors according to your settings.
– You can set the values of R-GAIN and B-GAIN only in AWC mode.
? NIGHT : Use the NIGHT mode if you want to set the white balance differently
according to the ambient luminance. If the NIGHT mode is set to OFF, the white
balance will always operate as set in DAY mode : If not to OFF, the camera will be
switched to as set in DAY / NIGHT mode according to the brightness. In the NIGHT
mode, you can set the values of RED, BLUE and BRIGHTNESS.
The screen will be displayed in colors according to your settings.
– You can set the values of R-GAIN and B-GAIN only in AWC mode.
For adjusting the whole balance, the following 5 modes are provided :
? ATW1(Auto Tracing White Balance mode 1) : The camera can be automatically
adjusted the color temperature in
OSD Menu Instructions real time, according to ambient conditions. The color temperature ranges from approx.
2500K to 9500K.
?ATW2 : The color temperature ranges from approx. 1800K to 10500K.
?AWC(Auto White Balance Control) : If you press the SETUP switch in the
appropriate item position, Auto White Balance will perform once.
?3200K : Set color temperature to 3200K.
?5600K : Set color temperature to 5600K.
RED : Adjust the strength of the red color.
BLUE : Adjust the strength of the blue color.
R-GAIN / B-GAIN : Enable you to set the current color temperature manually.
BRIGHTNESS : Select a brightness level in switching from setting in DAY mode to
setting in NIGHT mode.
DIGITAL ZOOM : ON / OFF
You can set the digital zoom factor and position. When the zoom factor and position
are defined, the digital zoom function will operate.
? LOCATION : If you press the SETUP key in the condition where the image is
enlarged as much as the ratio setting, you can watch an invisible area of the effective
screen as well using the direction keys(????).
– The DIGITAL ZOOM function enlarges the pixel itself, which can cause deterioration
of the quality.
Detail : 0~3
Control the horizontal or vertical distinction.
V-SYNC : INT
This camera model is fixed to “INT”(Internal synchronization).
AGC COLOR SUP : LOW / MID / HIGH
Adjust the color scheme according to the AGC value.
OSD Menu Instructions REVERSE : OFF / H / V / H.V
Mirrors video signals horizontally, vertically or both.
POSI / NEGA : + / –
Output as it is mirror the video brightness signal.
PIP : OFF / ON
Display a sup image together with the main image on the same screen using the
picture in picture function.
INTELLIGENCE You can configure the settings of motion detection and more. MOTION : OFF / TRACKING / DETECTION
Tracking – Detect and Track a moving object.
Detection – Detect a moving object.
ADVANCED : OFF. MOVED / FIXED(*Option)
If an object on the screen suddenly disappears or an object comes out from
somewhere and stays for a certain time, the area will be displayed.
? A detection(MOVED/FIXED) error may occur if :
– multiple motions occur continuously in random directions
– a fixed object moves in one position continuously
– a second object screens the first moving object
MASK AREA : 1~4
Specify an exceptional area of detection with mask.
Select a mask number, size and position.
DISPLAY : ON / OFF
When the DISPLAY option set to ON, a motion function will be displayed on the screen.
SENSITIVITY : 1~7
Set the sensitivity of the motion detection.
OSD Menu Instructions RESOLUTION : 1~5 If setting it too high, the camera can detect even a trivial movement of the target.
ALARM OUT : *Not Available
You can configure the privacy related settings.
The PRIVACY function will protect your privacy by screening the privacy area that you
have specified during monitoring. You can change the style to adjust the mosaic size
and color of the PRIVACY ZONE.
Use the four direction keys to select one from PRIVACY 1 through 8. Select one from
PRIVACY 1 ~ 8 and press the SETUP key to confirm your setting. You can specify a
pixel that moves as you change the PIXEL LEVEL to set the position.
– If more than one PRIVACY ZONE is specified and the PRIVACY SET is set to ON,
the PIP function will be deactivated.
How to set the point : You can set each position of the 4 point
? If you press the Setup key in
the PRIVACY ZONE. Each time you press SETUP key, the points available
? Use the four direction keys to set the position of each point. Set each
position of the four points and press the SETUP key to complete the
positioning. How to set the position : You can move the position of the all area.
? By pressing the SETUP key in
position of the privacy zone.
? Use the four direction keys to move the position and press the SETUP key
to confirm it.
OSD Menu Instructions OTHER SET
You can configure for Factory Defaults and more.
FACTORY DEFAULTS :
All the settings will be restored to the factory default.
OSD COLOR :
You can set the OSD color to BW, RED, GREEN or BLUE.
Configure the settings regarding the UART communication.
**the related function is not available in this camera version.
You can view the system information including the type, protocol, address, baud rate,
serial number and camera version.
The camera supports 5 different languages
Select a preferred language.
ENGLISH ENGLISH FRENCH FRENCH SPANISH SPANISH JAPANESE GERMAN PORTUGUESE INTALIAN
Fan & Heater Specifications(Option)
Power Consumption(Heater) 10W Power Consumption(Fan) 0.7W
Heater ON At 41F(5C) Heater OFF At 50F(10C)
For Fan & Heater operation, AC24V power input is required.
Specifications ? Common Specification
Image Sensor 1/3″ Interline Transfer Type Color CCD (Sony) Effective Pixels 768H x 494V (380K pixels) 752H x 582V(440K pixels) Scanning System 525 Lines 2:1 Interlace 625 Lines 2:1 Interlace Scanning Frequency 15.734KHz(H), 59.94Hz(V) 15.625KHz(H), 50Hz(V) High Shutter Speed 1/60~1/100,000sec 1/50~1/100,000sec Sens up X2 ~ x256 S/N Ratio More than 52dB (AGC Off) Sync. System Internal White Balance ATW1 / ATW2 / AWC / Manual
(ATW1: 2,300~9,500?K, ATW2: 1,800~10,500?K) OSD Built-in D-Zoom X1 ~ x10 / x0.1step DNR User, High, Middle, Low, Off selectable WDR(Option) On/Off Video Output VBS 1.0 Vp-p (75? Load) Power Supply(*) AC24V/DC12V10% Operating Temp. -10 ~ +50 Operating Humidity Max. 90% RH Dimension 158mm(Ø) × 116mm(H) (*) Use regulated & specified power supply.
Specifications IR-LED Type Resolution 600TVL(Color), 640TVL(B/W) Day & Night Functionality ICR type on AUTO(scene) / EXT(photocell) Min. Illumination 0 Lux ( IR-LED On) Lens f = 2.8~11mm Vari-Focal, DC Auto Iris F1.2 D/N Lens Power Consumption DC12V type Max. : 340mA/DC12V(IR-LED On)
AC24V/DC12V type Max. : 9.4VA / AC24V,
A-DNR 3-AXIS Gimbal
Vari-focal Vandal Resistant Dome Camera
MADE IN KOREA