3-AXIS GIMBAL VARI-FOCAL
INDOOR DOME CAMERA
Before installing and using the camera, please read the instructions thoroughly and retain them for reference.
This symbol is intended to alert the user to the presence of non insulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Wiring methods shall be in accordance with the National Electric Code. This product is manufactured to comply with the CE and FCC Certificate standard.
Composition ———————————————– 4
Explanation for Accessories ————————— 4
Features —————————————————- 5
Dimension ————————————————– 5
Parts Name and Description ————————— 6
Base Installation —————————————— 7
Connection ————————————————- 8
3-Axis Gimbal / Zoom & Focus Adjustment ——– 9
Switch & Volume Adjustment ————————– 10
Specifications ———————————————- 11
Confirm that the following parts are included:
Explanation for Accessories
Screws : Attaching the dome base firmly on the wall or ceiling.
Driver : Locking the pan screw of the gimbal bracket to allow the adjustment of
Service Monitor Cable : Monitoring the display screen through portable monitor
to adjust the camera.
SONY 1/3″ Super HAD High-resolution Color CCD
2.8~10.5mm Vari-Focal, DC Auto Iris F1.2 Day & Night Lens
Built-in Function selection Dip Switch
– ICR switching time, FLK, BLC, AWB
Auto switching IR-LED control by photocell (36pcs LEDs)
Function selection Dip switch built-in
– Day&Night switching time, FLK, BLC, AWB
Built-in DC Iris level adjustment volume
Easy adjustment of Focal Length & Focus
Service monitor (second video) port built-in
3-Axis Gimbal bracket (2-Pan, 1-Tilt)
Dimension (Unit: mm)
Parts Name and Descriptions
This model corresponds to DC12 TYPE.
2. DOME COVER RING
4. CAMERA MODULE
5. DOME BASE
6. SERVICE MONITOR
7. POWER CABLE
8. MOUNTING SCREW (PH 3.5 x 20)
1. Open the dome by turning the dome cover ring from the dome base fitting.
2. There are two mounting holes on the dome base so that users can install
the unit in any place such as ceiling, wall and etc.
3. Use two mounting screws (PH 3.5 x 20) to affix the dome base to a sturdy
Do not aim the camera directly into the sun.
– Power connections: Requires DC12V.
– All camera models are supplied with second video output on the
camera module. To use this feature along with a service monitor,
second monitor cable/connector is needed.
3-Axis Gimbal Adjustment
1. Pan: Adjust the first pan angle
by returning the gimbal 360? degree.
(see the figure No.1) 2. Tilt: Adjust the tilt angle by moving the gimal up and down. (see the figure No.2) 3. Second Pan: Loosen the pan screw (No.3) to adjust the pan to desired angle And fix the screw. (see the figure No.4)
Zoom & Focus Adjustments
1. If you require to make focal/focus
adjustments, loosen the lever bolt and
make necessary adjustments. 2. Loosen Zoom & Focus Levers and make the viewing angle/focus as shown. – Field of View: Telephoto(T) to Wide(W) – Focus: Near(N) to Infinity(?)
3. After the adjustments, tighten the
lever bolts to lock.
Switch & Volume Adjustments
DC Level Volume
Function Dip Switch Setting
Image Sensor 1/3″ Interline transfer type color CCD (Sony) Effective Pixels 768H x 494V (380K pixels) 752H x 582V (440K
pixels) Scanning System 525 Lines 2:1 Interlace 625 Lines 2:1 Interlace Scanning Frequency 15.734KHz(H), 59.94Jz(V) 15.625KHz(H), 50Hz(V) Resolution 550TVL(Color), 580TVL(B/W) High Shutter Speed 1/60sec 1/50sec S/N Ratio More than 48dB (AGC Off) Sync.System Internal White Balance ATW1 / AWC selectable Day&Night Functionality ICR type Min. Illumination 0Lux with IR LED On (36pcs) Lens F=2.8~10.5mm Vari-Focal, DC Auto Iris F1.2 D/N Lens
(Option: 2.8~11mm F1.2, 3.8~9.5mm F1.2) Video Output VBS 1.0 Vp-p (75? Load) Power Supply (*) AC24V / DC12V10%, DC12V10% Power Consumption
DC12V Model Max: 450mA/DC12V(IR LED On)
Operating Temp. -10 ~ +50 Operating Humidity Max. 90% RH Dimension 130mm(?) x 105mm(L) (*) Use regulated & specified power supply.
3-AXIS GIMBAL VARI-FOCAL IR DAY&NIGHT
INDOOR DOME CAMERA
MADE IN KOREA