2003/12/19 Ver:1.0 No:040025A
HIDDEN CCD CAMERA
1. Description … 1
2. Installation … 2
3. Wiring instructions … 3
4. Specifications … 4
5. PIR Detector board installation
and descriptions … 5
Thank you very much for purchasing our product.
This B/W (COLOR) HIDDEN CCD Camera uses high sensitive 1/3″ (1/4″)
interline transfer CCD Image Sensor (CCD = Charge Coupled Device), and all
state circuitry which provides extremely long life and high reliability. This
Camera offers excellent image quality with low lag and high burn resistance,
and is not subject to distortions from magnetic fields. Highly resistance to
shock and vibration, and easy to install this Camera is a very good
choice for your B/W (COLOR) CCTV system.
M A N U A L
STEP 1: Secure the bracket to the wall with screws. ( included as shown in
Figure 1 )
STEP 2: Attach the Camera Case to the bracket as shown in Figure 2.
STEP 3: Adjust the vertical and horizontal angles by loosening screws
(A&B) as in Figure 3 and by turning the bracket vertically and
3. Wiring instructions
STEP 1:Connect the coaxial cable between the camera and the monitor
using a 75Ohm coaxial cable.
STEP 2: Insert the AC plug into the AC power socket and the DC plug to the DC
Note: AC Adapter Sold separately.
Model B/W Normal Resolution CL Normal
Resolution CL Normal
Resolution CL High
sensor SONY 1/3″
CCD sensorSONY 1/3″
CCD sensorSONY 1/4″
CCD sensorSONY 1/3″
Elements (HxV) EIA/NTSC: 510×492
CCIR/PAL: 500×582 NTSC:510×492
TV lines 420
TV lines 380
TV lines 330
TV lines 470
Illumination 0.3 LUX /
F2.0 0.1 LUX /
F2.0 0.2 LUX /
F2.0 0.5 LUX /
F2.0 0.4 LUX /
System Interlace 2 : 1
S / N Ratio More than 48 dB
Characteristic GAMMA = 0.45
Sync System Internal, Negative sync.
Video Output 1 Vp-p / 75 Ohms. BNC or F connector.
Audio(Optional) 2 Vp-p / 50 Ohms. RCA connector.
(for model “Audio” & “including PIR working sensor” only)
Power Supply DC 12V 10?
(PIR Sensor not included)
1.32W 1.32W 2.04W 1.44W 2.52W
Lens Furnished Corn Lens f 3.7mm / F2.0
Temp. -10 to 50? ( 14 to 122?)
PIR Sensor For model including PIR working sensor only.
Note: Design and specifications are subject to change without prior notice.
5. PIR Detector board installation and
descriptions (for model including PIR
working sensor only)
(3PINS: Top, Center, Bottom) A. Top + Center w/black cap: Upon Walk-testing: Light
blinking (Disadvantages: Easy to identify as a security
B. Center + Low w/black cap: No light blinking while
detecting. (Advantages: less obvious)
A. To raise sensitivity: Turn clockwise to detect longer
distance and wider pattern.
B. To lower sensitivity: Turn counter clockwise for detection
in narrow areas.
3.Dwell Time Adjustment:
Adjustable from 2 to 40 sec. For closure period of N.C/N.O relay connected to an alarm
panel, light control or recording control of time lapse VCR,
A. Max. time: Turn counter clockwise.
B. Min. time: Turn clockwise.
Top + Center pins of “J4” must be selected to adjust the time
N.C.6 Output Terminals
4.Alarm control, Light control or
(N.O or N.C)
(3PINS: Top, Center, Bottom) A. Top + Center w/black cap: Operate with “VR2” to adjust
time. (To set the relay output of the Light control or
Recording control, the time is selected by individual
preference or application.
B. Center + Bottom w/black jumper: Relay output can be set
for Security control panel for only 2 seconds.
Note: N.C./N.O. relay output current: 1A 125 VAC, 2A 30 VDC.
Once or twice
4PINS: 2PAIRS w/jumper connectorPosition 1: Set to “ONCE” for instant reaction when PIR
detects someone: and either the “alarm or
Security control panel” or “Recording control”
will be triggered immediately.
Position 2: Set to “Twice” when PIR detects someone 2 times
within 15 seconds.
24 Hour/Anti-Tamper N.C.: Normally Closed
A. For connection to: Security panel or Light control CCTV
B. With anti-tamper function for 24 hours.
N.O.: Normally Open Contacts
?P.S.: Relay output current: 1A 125VAC, 2A 30V DC
7.Power: 12V DC
Standby Current: 3mA,
Working Current: 28mA Caution:
The PIR is triggered by body movement, excluding fixed
objects, however, do not place in direct sunlight or reflected
?Wide angle lens up to 100°, coverage areas to 30×30 feet.
?Provide 64 beans in 3 layers.
10 20 30
100¢X TOP VIEW