meets modern design
BOUNDARY OUTDOOR DETECTOR
PIRs providing 12m per side BXS-ST: 12 m / 40 ft side by side (total 24 m / 80 ft)
All BX SHIELD models feature a digitally enhanced signal recognition logic called SMDA increasing detection reliability. By analysing the detection patterns and environmental information SMDA can differentiate between genuine intrusions AND logic function to reduce false alarmsThe BX SHIELD only triggers an alarm signal when both upper and lower areas detect movement.the left and right detection areas. The sensor can differentiate between large area, reducing false activations and Individual detection area and sensitivity setting4 PIR SENSORS, IR DIGITAL ANTI-MASKING
surface has been covered, blocked or painted.
TroublesignalTrouble outoutputs for the left and the right detection areas For environments where the temperature differencebetween the human body and the background is verysmall, the extreme high detection mode increases the PIRsensitivity to prevent any missed alarms.Extreme high detection mode
Left : 12 mRight : 2.5 m
Up to 12m/ 40ft. flexible detection areas on each side of the sensor
Black cover / black body
White cover / black body
White cover / white body
Silver cover / black body
Suitable for a metal bandup to 23 mm (1 inch) in width
Product Featuresresistor modules are available.UV resistant ASA bodyUV protection(BXS-ST,AM only)Versatile designWeb based manual for wired modelsWeb based manual Single type battery, no power sharing with transmitter, LED Wireless transmitter Approx.years
Flat profile supported by an internal honeycomb structure ensures durability.Optical lens units are sealed and re-enforced to add extra strength.SecureA sense of security, designed for youfor morediscrete90 degrees rotation mechanismthe sensor’s adjustment and settings are in blue for ease he BX SHIELD series features a level indicator to ease the installation process.
*Battery not included.CR123A x 3 (3.0 V DC)CR2 x 3 (3.0 V DC)1/2AA x 3 (3.6 V DC)1/2AA x 6 (7.2 V DC x 3)**3.6 V DC 1/2 AA battery in series.
Walk test mode will time out after three minutes and the setting will return to “normal mode”. Tamper output activates when face cover or back box is removed.
130 (5.12)45 (1.77)
Back side view of the main unit( )
65 (2.56)45 (1.77)35 (1.38)
TO WALLAWAY WALL
Specifications and designs are subject to change without prior notice.These units are designed to detect an intruder and activate an alarm control panel.Being only a part of a complete system, we cannot accept responsibility for any damages or other consequences resulting from an intrusion.199.7 (7.86)52.7 (2.07)92.8 (3.65)83.5 (3.29)
2.5 m (8 ft)
3.5 m (12 ft)
6.0 m (20 ft)
8.5 m (28 ft)
12.0 m (40 ft)0000
Passive infrared4 zones ; 2 zones on each side, 180Â°narrowTO WALL 0Â° angled forwardAWAY WALL : 3Â° angled forwardExtreme high : 1.0Â°C[Individual;Right or General], [N.O. or N.C.] are selectable[Individual;Left or General], [N.O. or N.C.] are selectablee selectableN.O. or N.C.] is selectableTamper output is shared with trouble output.Wall, pole (outdoor,indoor),indoor)Connector for POWER and ALARM (R),  Connector for ALARM (L), Connector for TROUBLE,  Velcro tape,  Screw (4×20 mm) x 2Top viewCopyright (C) 2017 OPTEX CO., LTD. No.77098-00-17375-0001709www.optex.netOPTEX CO.,LTD. (JAPAN)OPTEX INC. / AMERICAS HQ (U.S.) www.optexamerica.comOPTEX DO BRASIL LTDA. (Brazil)www.optex.net/br/es/secOPTEX (EUROPE) LTD. / EMEA HQ (U.K.)www.optex-europe.comTECHNOLOGIES B.V. (The Netherlands)www.optex.euOPTEX SECURITY SAS (France)www.optex-security.comOPTEX SECURITY Sp.z o.o. (Poland)www.optex.com.plPINNACLE INDIA, PVT., LTD. (India)www.optex.net/in/en/secOPTEX KOREA CO.,LTD. (Korea)www.optexkorea.comOPTEX (DONGGUAN) CO.,LTD.www.optexchina.comOPTEX (Thailand) CO., LTD. (Thailand)www.optex.co.thBATTERY BOX
Detection angle from wallCurrent drawWarm-up periodTrouble outputTamper outputOperation temperatureInternational protectionWeightRed LED ; 1. Warm-up(DIP switch ON or Walk test)Red LED ; 1. Warm-up(DIP switch ON or Walk test)Red LED ; 1. Warm-up(DIP switch ON or Walk test)Red LED ; 1. Warm-up(DIP switch ON or Walk test)Passive infrared4 zones ; 2 zones on each side, 180Â°narrowTO WALL 0Â° angled forwardAWAY WALL : 3Â° angled forwardExtreme high : 1.0Â°C[Individual;Right or General], [N.O. or N.C.] are selectable[Individual;Left or General], [N.O. or N.C.] are selectableopen when face cover, main unit or base unit is removedWall, pole (outdoor,indoor)Screw (4 x 20 mm) x 2
199.7 (7.86)98.7 (3.89)
Metal band: 23 mm or lessBXS Pole mount plate
Para poder atenderte mejor necesitamos conocer: