SPECIFICATIONSWarm-up periodTrouble outputTamper outputWeight
ModelVXI-RVXI-RAMVXI-RDAM
3 Ð 9 V DC(Lithium or Alkaline Battery)10A (standby) / 4 mA (max)N.C. / N.O. Selectable-Solid State Switch 10 V DC 0.01 A (max)N.C. / N.O. Selectable-Solid State Switch 10 V DC 0.01 A (max)Wall, Pole (Outdoor, Indoor)Connector for POWER and ALARM, Connector for TROUBLE, Screw (4×20mm) ×2, Masking seal ×3Warm-up periodTrouble outputWeight
Enable: During WALK TEST or LED SW on.Red: Warm-up, alarm, masking detection (VXI-RAM only)9A (standby) / 4 mA (max) 18A (standby) / 8 mA (max)Enable: During WALK TEST or LED SW on.Red: Warm-up, alarm, masking detection.Yellow: Warm-up, MW detect.-20 Ð +45¡C (-4 Ð +113¡F)
24 mA (max) at 12 V DCN.C. / N.O. Selectable 28 V DC 0.1 A (max)N.C. 28 V DC 0.1 A (max) open when cover removed.Wall, Pole (Outdoor, Indoor)Red: Warm-up, alarm,N.C. 28 V DC 0.1 A (max)
20 mA (max) at 12 V DC
ModelVXI-STVXI-AMVXI-DAM
Unit:mm(inch)The actual detectiondistance is dependentSIDE VIEW (Detection Distance by Positions)
Position 1 : Approx. 12m/40ft (Default)10m12m
Position 2 : Approx. 8.5m/27.9ft10m12m
Position 3 : Approx. 6.0m/19.7ft05m10m12m
Position 4 : Approx. 3.5m/11.5ft5m10m12m
Position 5 : Approx. 2.5m/8.2ft5m10m12m
TOP VIEW
12m12m10m10m5m5m
fjb
ABCEFG
(7.32)
105.5(4.15 )
Pitch=83.5
DETECTION AREA
DIMENSIONS
TEL:http://www.optexdobrasil.com.br/OPTEX (DONGGUAN) CO., LTD. SHANGHAI OFFICE (CHINA)TEL:OPTEX (EUROPE) LTD. (UK)TEL:5-8-12 Ogoto Otsu Shiga 520-0101 JAPANTEL:
35 mA (max) at 12 V DCRed: Warm-up, alarm,Yellow: Warm-up, MW detect.-20 Ð +45¡C (-4 Ð +113¡F)
VXI-T-BracketBATTERY BOX (RBB-01)Wall Tamper (WRS-04)Different values of EOL resistances can be instantly set by
CR123A x 31/2AA x 31/2AA x 6Alarm: 2.2k / Tamper: 4.7k / Trouble: 2.2PEU-A(PACK)Alarm: 4.7k / Tamper: 4.7k / Trouble: 6.8PEU-B(PACK)Alarm: 1.0k / Tamper: 1.0k / Trouble: 12PEU-C(PACK)Alarm: 1.0k / Tamper: 1.0k / Trouble: 3.0kPEU-D(PACK)Alarm: 1.1k / Tamper: 1.1k / Trouble: 15kPEU-E(PACK)Alarm: 5.6k / Tamper: 5.6k / Trouble: 5.6kPEU-F(PACK)
BATTERY OPERATED MODEL: Battery operated Anti-masking
Without a back box (VXI-ST / AM / DAM)
181.9(7.16)
64.5(2.54)
With a back box (VXI-R / RAM / RDAM)
70.9(2.80)
71.3(2.81)
for ST, AM, DAM modelsWall Tamper (WRS-02)
? Flexible Detection Patterns? Expanded Features in a Down-sized Body
To cover a wider field, optional T-Bracket Active IR Anti-masking detects PIR and MICROWAVE DETECTORfrom traffic, DAM/RDAM offers higher false alarm immunity. Optimal different detection pattern can be
VXI-AM (Wired model)VXI-RAM (Battery operated model)
coincidence of events can be filtered out. This technology virtually
Digitally Enhanced Reliability
Wireless ReadyFlexible Detection Area SettingTough Mod 2
No DetectionDetection
etc.
recognition logic called SMDA. SMDA improves immunity against SMDA logic (Super Multidimensional Analysis)VXI-ST (Wired model)
mm (inch)
8 Horizontal Area
OPTEX Tough ModTechnology enables a technology. Gold-plated Tough Mod increases humid climates. Now, Tough Mod 2
Alternatively, use a metal band with less than Versatile Mounting Plate
ImagesPCB boardMaterialCeramicGold-platedAntennaMaterial
VX Infinity seriesComventional
Wireless Trigger Life Time* Reference6years
ApproxApproxA wireless transmitter of your choice can be current* from a battery. Optional battery box UV Resistant ASA Body*WTLT is an approximation based on hypothetical condition operated with settings; LED(OFF), AM(ON), Battery Saving Timer(120sec)*As low as 9 micro amperage at a standby.
Anti UVProtectionIP55
their packages. The back box is the detector. Use
Tough Mod.2
Tough MicroWave Unit
2
EOL Module Socket
Use for masking optional area.Use for two wing area setting.(A or G position)
jihgfedcbnmlkajihgfedcbnmlk
Use for masking optional area.Use for two wing area setting.(A or G position)
jihgfedcbnmlkajihgfedcbnmlk
Use for masking optional area.Use for two wing area setting.(A or G position)
jihgfedcbnmlkajihgfedcbnmlk
REAL SIZE
DisarmSabotagedTrouble out
Trouble
DetectionAlarm when both upper and lower detectionarea are blocked.
Tin-plated
CAUTION: T-Bracket cannot be used for a Cover TamperSensitivity Adjustment SwitchWalk Test Mode LEDlow current microwave technology.
Para poder atenderte mejor necesitamos conocer: